2. Bolt bracket on driver side of engine compartment,
    between strut tower and power steering fluid
    canister. (see picture 1)

3. Be careful of adjustment knobs when fastening
    ARC-2 to bracket. ARC-2 can mount to bracket with

switches and knobs facing towards engine or away.

4. Run ARC-2 wire harness to coil pack. (see picture
    2&3)

5. Fasten ARC-2 harness with wire ties provided.

6. Use wire ties to fasten tach adapter box to existing
     wiring.

7. Disconnect car harness from coil pack. (see picture 2)

8. Plug ARC-2 harness connectors between car
    harness and coil pack. (see picture 2)

9. Run power wires to battery, following existing wire
    harness along firewall. (see picture 3)

10. Fasten harness with wire ties, and connect to battery
      with ring terminals.

11. Install fuse on power harness.

12. Set switched to desired settings.

13. Turn on key.